Vaporesso XROS 3 Instructions Beginner’s Step-by-Step Guide banner featuring two XROS 3 vape devices, one pink and one black, on a vibrant blue and pink gradient background.

Vaporesso XROS 3 Instructions: Step-by-Step Guide for Beginners

Are you new to vaping and just bought the Vaporesso XROS 3? We know everything for the first time can make trouble but,  Don’t worry — you’re not alone.

Many beginners feel trouble when they just start vaping. But with this simple guide, you’ll learn exactly how to use the Vaporesso XROS step by step. We’ll walk you through everything, from turning it on to adjusting airflow and charging it right. Let’s make vaping easy and enjoyable again.

Vaporesso XROS 3 Instructions

The Vaporesso XROS 3 is a sleek, powerful pod vape made for both beginners and experienced users. It’s simple to use but still gives you a smooth, rich vape. You can choose between auto-draw (just inhale) or press the button to vape.

It is very lightweight and easily fit in your hand and also uses a mesh coil which delivers smooth flavour and strong hit. Plus, it uses Type-c USB cable to charge which is fast and always ready to go.

Let’s explore how to use it the right way.

How to Turn On Vaporesso XROS 3

Starting your XROS 3 is easy:

  1. Press the button 5 times quickly, you’ll see the light flash.
  2. The light shows it’s now on and ready to use.
  3. Quickly press the power button five times to turn off your Vaporesso XROS.

Tip: Always turn it off when putting it in your pocket or bag to stop it from firing by mistake.

How to Know When Vaporesso XROS 3 Is Charged

The device uses a colour light to show battery levels:

  • Red – Low battery (0–30%)
  • Yellow – Medium battery (30–70%)
  • Green – Fully charged (70–100%)

To charge:

  1. Plug the USB Type-C cable into the bottom of the device.
  2. It takes about 60 minutes to fully charge.

Fact: The Vaporesso XROS 3 has a 1000mAh battery, which can last a full day depending on your use.

How to Fill Vaporesso XROS 3

Filling the pod is simple and mess-free:

  1. Remove the pod from the device.
  2. Snap off the mouthpiece (push to one side).
  3. You’ll see a red hole, that’s the fill port.
  4. Insert your e-liquid bottle tip and squeeze gently.
  5. Close the mouthpiece and wait 5–10 minutes before vaping.

Tip: Always let the coil soak after filling for the first time to avoid burning it!

Vaporesso XROS 3 Airflow Settings

You can control how tight or loose your draw feels:

Slide the airflow control switch on the back of the device.

  1. All the way closed = tight draw (feels like smoking)
  2. All the way open = looser draw (more airflow)

Try different airflow settings to find what’s comfortable for you.

Vaporesso XROS 3 Button Functions

Here’s what the single button does:

  1. 5 clicks = Turn on/off
  2. Press while vaping = Manual puff
  3. Hold to check battery light = Green, yellow, or red

You don’t have to press the button to vape. Just inhale if you prefer auto-draw. It’s your choice.

How to Use Vaporesso XROS 3

Here’s a quick step-by-step:

  1. Charge your vape fully.
  2. Fill the pod with your favourite e-liquid.
  3. Wait 5–10 minutes to let the coil soak.
  4. Turn it on with 5 clicks.
  5. Adjust airflow to your liking.
  6. You can vape by breathing in through the mouthpiece or by pressing the fire button.

Case Study: James, a first-time vaper, picked the XROS 3 because it was easy to use. After just a few tries, he found his perfect setting and quit smoking in just 2 weeks!

FAQs:

Q: What e-liquid should I use in Vaporesso XROS 3?

Use 50/50 VG/PG or Nic Salt e-liquids for best results.

Q: Can I use it while charging?

Yes, it supports pass-through charging, but it’s better to wait for full charge.

Q: My pod tastes burnt. What should I do?

You may have vaped too soon after filling. Try a new pod and let it soak fully next time.

Q: How long does a pod last?

Usually around 5–7 days, depending on how often you vape and the e-liquid you use.

Q: Can I vape while it’s charging?

Yes, the XROS 3 supports pass-through charging, so you can vape and charge at the same time.

Q: How do I clean my Vaporesso XROS 3?

Remove the pod and wipe the inside with a dry tissue. Clean the pod with warm water and let it dry fully before refilling.

Q: Is the XROS 3 better for Mouth-To-Lung (MTL) or Direct-To-Lung (DTL)?

It’s made mainly for MTL vaping, which feels like smoking. If you like a tighter draw, it’s perfect for you.

Q: How long should I wait after filling the pod before vaping?

Wait at least 5–10 minutes after filling a new pod. This lets the coil soak up the e-liquid properly and helps prevent dry hits.

Q: What is the battery size and how long does it last?

It has a 1000mAh battery. That’s enough for most vapers to get through the entire day without recharging.

Q: How do I know when to change the pod?

You’ll notice a burnt taste, weaker flavour, or less vapour. That’s your sign to replace the pod.

Final Thoughts: Vaping Made Simple

The Vaporesso XROS 3 is built to give you control, flavour, and comfort, all in a small device. Whether you're brand new or switching from smoking, this vape can guide you on your journey.

Looking for something more simple and ready to use?
Explore our range of Crystal Prime or Hayati Pro Max Vapes collection of Disposable Vapes, if you prefer no-fuss, flavour-packed disposables.

"Start simple, stay strong, the best vape journey begins with the right guide."

Ready to try it? Check out our latest deals on the Vaporesso XROS Pods collection and experience the smoothest vape of your life.

Back to blog