How to Charge the Crystal Prime 7000: Charging Time, Instructions & Nicotine Info for UK Vapers

Ever picked up your Crystal Prime 7000, only to realise it's out of puff just when you need it most? We’ve all been there — that moment of panic when the light flashes or the vape stops working. Don't worry. In this blog, we’ll walk you through how to charge it, how long it takes, what that flashing light means, and how much nicotine it contains — all in easy language.

Let’s sort your vape out so you’re never caught off guard again.

What Is the Crystal Prime 7000?

The Crystal Prime 7000 is a rechargeable disposable vape made for UK vapers. It offers up to 7000 puffs and comes with Mesh Coil Technology for smooth, flavourful hits. What makes it special is that you can recharge it, meaning no waste when the battery dies — just plug it in and keep vaping.

Crystal Prime 7000 Rechargeable Guide

Yes, the Crystal Prime 7000 is rechargeable. Unlike single-use vapes, this one comes with a USB-C charging port at the bottom. It helps you use every last bit of e-liquid inside before throwing it away.

• Rechargeable via USB-C
  
• Fast charging supported
  
• More eco-friendly than throwaway vapes
  

Crystal Prime 7000 Charging Time

Wondering how long it takes to charge? Here’s what most users experience:

1. Charging time: Around 30 to 45 minutes
   
2. Battery capacity: ~600mAh
   
3. Full charge lasts: Until the e-liquid runs out (up to 7000 puffs total)
   
   

Tip: Don't leave it on charge overnight. Overcharging can reduce battery life.

Crystal Prime 7000 – How Long to Charge It?

For a near-empty battery, expect a full charge in under 1 hour. If the vape’s not totally drained, it may take even less time.

Here’s a simple guide:

Make sure to unplug it once it’s fully charged to avoid wear and tear.

Crystal Prime 7000 Charging Instructions (What the Flashing Lights Mean)

If your Crystal Prime 7000 is flashing, here’s what it might be telling you:

1. Red flashing = Battery low
   
2. Blue flashing = Charging
   
3. Green solid light = Fully charged
   
4. No light = Check your cable or port
   
   

How to Charge It:

1. Find the USB-C port at the bottom.
   
2. Plug it into a USB-C charger (not higher than 1A output).
   
3. Wait for the light to go solid green.
   
4. Unplug and enjoy!
   
   

Tip: Use a power bank or wall adapter — charging from laptops may be slower.

Crystal Prime 7000 Nicotine Strength (UK Info)

For UK vapers, the Crystal Prime 7000 typically comes with:

1. Nicotine strength: 20mg (2%) Nicotine Salt
   
2. E-liquid: Around 12ml
   
3. Puffs: Up to 7000 depending on usage
   
   

This strength gives a smooth throat hit and fast nicotine absorption. It’s great for ex-smokers or those looking for something stronger than 10mg options.

Note: Always check the packaging. Avoid black market vapes with incorrect labelling.

Crystal Prime 7000 Specifications:

FAQs: Crystal Prime 7000 Charging & Nicotine

How do I know my Crystal Prime 7000 is charging?

When plugged in, the vape will show a blue light while charging and a green light when full.

Can I use it while charging?

It’s not recommended. Always let it fully charge before using to avoid battery damage.

What if the light keeps flashing?

If the light keeps flashing after charging, it may be faulty or out of e-liquid. Time for a new one!

How long does a full charge last?

Usually a full charge lasts until the e-liquid is used up, which can be a few days depending on usage.

Final Thoughts – Ready to Charge & Puff?

The Crystal Prime 7000 isn’t just powerful — it’s smart. You get long-lasting puffs, rechargeable convenience, and strong nicotine delivery — all in one sleek vape.

Don’t let a flat battery ruin your moment.
Charge it, puff it, and enjoy it to the last drop.

Take Action Now

• Explore Crystal Prime Vapes
• Stock up on your favourite flavours
• Charge smarter, vape longer

“A vape is only as good as how well you care for it. Treat it right — it’ll treat you better.